Meetproducten

Digital Conductance - Controller

Manual selection of up- or downcontrol
Push- button code switches for controller setpoint
Status indication by red, green and yellow LEDs
Switching output: 230Volts, 150Watts, fuse accessible without opening the case
Weight: approx. 700g
Powerconsumption: approx. 5Watts
Controller ranges: 100µS / 1000µS / 10mS / 100mS

Digital Conductance - Meter

Ranges: 0- 200µS Resolution 0,1µS
Ranges: 0- 2000µS Resolution 1,0µS
Ranges: 0- 20mS Resolution 10,0µS
Ranges: 0- 200mS Resolution 100,0µS
Accuracy: better 3%
Cell constant: approx.1cm
Ambienttemperature: 10- 50°C
ATC: Automatic Temperature Compensation
Display: red 4- digit 7- segment LED- Display
Rangeselection: rotary switch, 4 ranges
Calibration: +/ - 10%adjustment
Powersupply: 230Volts / 50Hz
Out putsloading: Since designed for permanent “ON” condition onall outputs
Dimensions: 220x148x70mm (LxWxH)

Digital Conductance - Processor

Automatic up- or down control fromfrom covering all conductance ranges
Push- buttons for programming the setpoints
Calibration: programmable by push – buttons
Switching outputs: 2outlets in the rear panel, 230 Volts,150Watts each
Status indication by red, green and yellow LEDs fuses accessible without opening the case
1m power cable with protective control plug (’Schuco’-Plug)
Weight: approx. 750g
Powerconsumption: approx. 6Watts

Digital Interval - Automatic

2 channel pump control, status indicated by red LEDs
Separate adjustable pumprotation speed 5% to 100%
Weight: approx. 500g
Powerconsumption: approx. 5Watts
Switching output 230Volts, 150Watts, fuse accessible without opening the case
Separate adjustable on/off times:10sec to 15min
Manually selectable modes: permanent on, interval, program night mode,light dependent switching, feeding mode with automatic (30min) fallback

Digital pH - Controller

Manual selection of up- or downcontrol
Push- button code switches for controller setpoint
Calibration: by recessed potis in the front panel
Controller range: 0,00 pH to 9,99 pH
Status indication by red, green and yellow LEDs
Switching output: 230Volts, 150Watts, fuse accessible without opening the case
Weight: approx. 700g
Powerconsumption: approx. 5Watts

Digital pH - Meter

Range: 0,00 - 14,00 pH
Resolution: 0,01 pH
Accuracy: better 2%
Accuracy: better 2%
Input resistance: 10 Ohm
Ambienttemperture: 10- 50°C
Compensatedfor: 25°C
Display: red 4- digit 7- segment LED- Display
Outputsloading: designed for permanent “ON” condition on all outputs
Dimensions: 220x148x70mm (LxWxH)
Powercable: 1m cord with a EURO-plug
Powersupply: 230Volts / 50Hz

Digital pH - Processor

Automatic up- or down control from 0,00 pH to 14,00 pH
Push- buttons for programming the setpoints
Automatic temperature compensation using an integrated temperature sensor
Calibration: programmable by push – buttons
Switching outputs: 2outlets in the rear panel, 230 Volts,150Watts each
Status indication by red, green and yellow LEDs fuses accessible without opening the case
Weight: approx. 750g
Powerconsumption: approx. 6Watts

Digital Redox - Controller

Manual selection of up- or downcontrol
Push- button code switches for controller setpoint
Calibration: by recessed potis in the front panel
Controller range: -999 to 999 mV
Status indication by red, green and yellow LEDs
Switching output: 230Volts, 150Watts, fuse accessible without opening the case
Weight: approx. 700g
Powerconsumption: approx. 5Watts

Digital Redox - Meter

Range: -2000 to +2000mV
Resolution: 1 mV
Accuracy: better 1%
Input resistance: 10 Ohm
Ambienttemperture: 10- 50°C
Compensatedfor: 25°C
Display: red 4- digit 7- segment LED- Display
Outputsloading: designed for permanent “ON” condition on all outputs
Dimensions: 220x148x70mm (LxWxH)
Powercable: 1m cord with a EURO-plug
Powersupply: 230Volts / 50Hz Powersupply

Digital Redox - Processor

Automatic up- or down control from -999 to 999mV
Push- buttons for programming the setpoints
Calibration: programmable by push – buttons
Switching outputs: 2outlets in the rear panel, 230 Volts,150Watts each
Status indication by red, green and yellow LEDs fuses accessible without opening the case
Weight: approx. 750g
Powerconsumption: approx. 6Watts

Digital Thermo - Controller

Measuringrange: -55,0 to +150 °C
Resolution: 0,1 °C
Weight: approx. 350g
Powerconsumption: approx. 3Watts
Controlling range: 0 to +50 °C Accuracy: 0
2 °C Controller:1output for heating, 1 output for cooling each 235Volts / 2000Watts status indication by yellow LEDs
Setpoints: separate for heating and cooling
Hysteresis: separate for heating and cooling
Malfunction: adjustable from 0,2 to 1,0 °C indicated by red LED

GH Algemene hardheid testset

Testset voor het vaststellen van de algemene hardheidd
Meetbereik 1–20 od.
Aantal testen 200.
Houdbaarheid 2 jaar.

KH Carbonaathardheid testset

Testset voor het vaststellen van de Carbonaathardheid
Meetbereik 1–20 od.
Aantal testen 200.
Houdbaarheid 2 jaar.

Moonlight - Timer

LED- Displays for: moonphase(light onper day) and time
Automatic moonlight control
Synchronisation with real moonphaseprogrammable
2 free programmable timer
Integrated buffering battery 70hrs
Switching outputs: 3 outlets in the rear panel, 230Volts, 150Watts for moon,1000Watts for timers
Status indication (function andoutputs) by red and yellow LEDs
Easy 8- button operation, reset switch
Testmode: outputs on fuses accessible without opening the case
Weight: approx. 400g
Powerconsumption: approx. 8 Watts

Multi - Timer

3 channel timer with day andweekprogram
Universal timer for everyday use programmable down to minute intervals
Manual sommer/ wintertime selection
Status indication by red and yellow LEDs
Switching outputs 230Volts, 750Watts, fuses accessible without opening the case
Weight: approx. 800g
Powerconsumption: approx. 8 Watts

NH4 Ammoniak / Ammonium testset

Deze Ammoniumtest heeft een bereik van 0.2–10 mg/l en er kunnen 100 testen mee worden uitgevoerd.
Houdbaarheid 2 jaar.

NO2 Nitriet testset

Deze Nitriettest heeft een bereik van 0,05 tot 1 mg/l en er kunnen 100 testen mee worden uitgevoerd.
Houdbaarheid 2 jaar.

NO3 Nitraat testset

Deze Nitraattest heeft een bereik van 0,0 tot 500 mg/l en er kunnen 100 testen mee worden uitgevoerd.
Houdbaarheid 2 jaar.

O2 Zuurstof testset

Meetset voor het vaststellen van het zuurstofgehalte
Meetbereik: 1–12 mg/l.
Extra nodig: zuurstof reactieflesje.

PO4/3 Fosfaten testset

Testset voor het vaststellen van het Fosfaatgehalte
Meetbereik: 0,25 tot 3 mg/l.
Aantal metingen 100.
Houdbaarheid 2 jaar.

Testlab 10 Aquamerck

Een complete meetset in een systeemkoffer! Met deze testlab kunnen 9 belangrijke metingen worden uitgevoerd + fosfaat.
Inhoud:
pH bereik: 4,5– 9 pH – 200 metingen
NH4 bereik: 0,2– 5 mg/l – 50 metingen
KH bereik: 1.20 od – 400 metingen
GH bereik: 1.20 od – 400 metingen
NO2 bereik: 0,025 – 0,5 mg/l – 150 metingen
NO3 bereik: 10–150 mg/l – 100 metingen
ZUURSTOF bereik: 1 – 10 mg/l – 100 metingen
ZUURSTOF reactieflesje
FOSFATEN bereik: 0,25 – 3 mg/l – 100 metingen
TEMPERATUUR bereik: 0 – 40 Celsius
ZOUT zoutpen (electronisch) Eutech bereik: 0.10 –10
Set in systeemkoffer
NL Gebruiksaanwijzing